How To Set Up Wireless Connection in PIXMA MG3540?

There are two ways to set up Canon PIXMA MG3540 Wireless connection. The first on is WPS connection method and the other one is Standard connection method. Both steps are given below. If you need any assistance, then you can go to set Up PIXMA MG3540 Wireless help.

WPS Connection Method

It is the easiest method for connecting the PIXMA MG3540 Printer to a network without password. Before you go through steps of WPS Connection Method some conditions need to be fulfilled which are:

·         First of all, the access point must have a physical WPS push button available. If the WPS push button is not available, then you can use the instructions in the Standard Connection Method.

·         Second thing is that, your network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Almost every WPS enabled access points use this protocol.

Steps for Connecting PIXMA MG3540 through WPS

·         First of all, switch on the printer.

·         Then, press the Wi-Fi button and release only it after the alarm light blinks.

·         Now, when the Wi-Fi button light flashes blue, then press the WPS button on the access point within 2 minutes. You can refer the access point user guide for starting WPS on the access point.

·         The flashing of blue light next to the Wi-Fi button will keep indicates that the printer is searching for the network.

·         The power lights and Wi-Fi will flash once the printer starts connecting to the access point and will stop flashing and stay lit once the connection between the printer and the wireless network is established successfully.

Making Confirmation through Network Settings

 Follow the steps given below in order to make sure that the printer is connected successfully to wireless network:

·         Switch on the printer.

·         After that, load A4 or letter sized plain paper sheet.

·         Press and hold the resume or cancel button until alarm lamp 15time flashes and after that release it.

·         Network information page will be successfully printed.

·         Refer the printout and you can check the name of the connection under the “SSID” (Service Set Identifier) field while the “Connection” field should indicate “Active”.

Standard Connection Method

In case, if your router does not support WPS, then you can use Standard Connection Method.

·         First of all, insert the CD which came along with the Printer device. You can also download the manual and software of the Canon Printer model number PIXMA MG3540.

·         Now, initial screen appears click the Next.
·         A screen will displayed asking you to connect between USB or wireless connection.
·         Your printer and lamp power should be turned on and click on Next.
·         After that, click on connect to network tab.
·         Next, after connecting to network click on Cableless setup.
·         Now, hold the printer Wi-Fi button till the orange lamp flashes, and then release it after the second flash.
·         Also make sure that blue (Wi-Fi) lamp flashes quickly and green power lamp is lit and click on the Next.
·         Now, the screen appears for region selection and click on Next.
·         Select the place of residence and click on the Next button.
·         After that, select the software you wish to install and click Next.
·         Next, click on agree of end user license agreement.
·         Now, Installation Wizard Processes and click on Next button.
·         At last, the screen appears with model number and name of wireless network. And Windows Cabless Setup is completed.

Hopefully, the above stated methods are helpful in setting up your printer. If you are detecting any trouble in the process.

Things you need to Remember before Changing Gmail Password

Passwords are the most essential credential which you need to access any mail service. Nowadays, when there are lot of security issues, such hacking, spamming, data stealing, and much more it is very important for you to keep your password strong and don’t keep the same password for very long time. It is very easy to change the Gmail passwords however, there are few things which you need to keep in mind while changing it. Here, in this article, we will discuss the things which you need to remember before changing Gmail password. So, before starting Gmail password recovery service have an eye on these things.

·         Determine The strength Of The password : - Strength of the password is very important thing which you need to keep in mind. It will be determined on the basis of factors that includes length of the password, character length etc. The red indication in the password checker implies that the password which you entered is insecure and the green indication shown that the password you entered was secure. Create the password which is combination of special characters, alphabets, and number.

·         Update the System: - This is very essential in order to defend your mail from threats including spam and vulnerabilities. It is also suggested that allow your device for updating automatically. That’s the one way you can terminate the threats and malicious links.

·         Antivirus: - To keep your email and confidential data safe from being tracked and theft, you need good security software. Antivirus is very essential thing for securing the email and its data from the malicious links including spam mails, Hijackers, unsolicited web mails etc.

·         Never share password: - Sharing your Gmail password with someone is not a very good idea. To be safe keep your password secret and protected from anyone.

These are the some important things which you need to keep in mind while changing your Gmail password. 

Easy Steps to Recover Missing Norton Security Toolbar on Google Chrome

Norton is one of the most popular and best antivirus software that aims to protect your system from the virus, malware, Trojan and other security threats. It is very easy to use security software. However, sometimes, users complain that Norton Security toolbar is missing from Chrome. But the best thing is that you can easily get it back. Norton toolbar is installed along with the Norton product, such as Antivirus, internet security or others. However, for some browsers, you need to install it manually as an extension from the respective web store. Here, in this article, we will discuss steps to recover missing Norton Security Toolbar on Google Chrome. In case of any trouble, you can contact Norton.

How to install Norton Security toolbar on Google Chrome?

For installing the toolbar, follow the steps mentioned below.

·         First of all, Start Norton.

·         Now, if a pop up about the toolbar extension appears, follow the instructions on the pop-up and in case, if you are not able to see the pop-up, then follow the instructions.

·         Now, in the main window, double-click on ‘Identity’

·         Then, click ‘Identity safe’ to install Norton security toolbar on Google Chrome.

·         Next, in the Norton Identity safe window, click on the ‘settings’ icon that is visible at the bottom of the window.

·         Then, on the General tab, next to the Google Chrome, click on ‘Install extension’

·         After that, follow the on-screen instructions to install the extensions. To get full web protection and password management, you are recommended to add all the extensions. And remember that the password management that is provided by the Norton Identity safe extension cannot function if the toolbar extension is either disabled or not installed.

·         At last, check whether all the extensions are properly installed including the Norton search engine, home page, toolbar and identity safe or not.

So, by following these simple steps, you can install Norton Security Toolbar on Google Chrome. If you are encountering any trouble or detecting any issue at any steps.

Steps to Reset the Thunderbird Password

It is very important to change the email passwords on regular basis for maintaining the security. If you use Mozilla Thunderbird for managing the multiple email accounts then you can use the password manager to save username or password of every email account. The main benefit of saving the passwords in Thunderbird password manager is that you get access to all email accounts on single platform. For the security reasons, it is recommended that you should keep updating Mozilla Thunderbird password. Here, in this article, we will discuss the steps to reset Thunderbird Password.

Things to remember before changing Thunderbird Password

Here are some important things which you need to keep in mind before changing the password.

·      Mozilla Thunderbird does not support the editing of saved password.  So, you need to clear the previously saved passwords and save the new ones.

·         Before changing the saved password, make sure that your email accounts are perfectly configured.

How to reset the Thunderbird Password?

·         First of all, log into your Thunderbird account.

·         Then, click on “Tools”

·         Next, click “Options” and choose “Security” Tab.

·         Now, open “Password” and click the “Saved Passwords”. The password window will get opened.

·         Then, select the account whose password you want to change and click on the “Remove” button to clear the previously saved password.

·         Click on “Close” button.

·         Now, in the options window, click “OK” button.

·         After that, exit Thunderbird and restart it.

·         Now, click on “Get Mail” button.

·         You will be prompted to enter the password as soon as Thunderbird tries to access the account.

·         Now, enter the new password.

·         Finally, click on “OK”.

So, these are the simple steps which you need to follow for changing the Thunderbird password.

Steps to Print Index Cards using Lexmark Inkjet Printers

Lexmark is the leading manufacturer of wide range of printing products. People rely on the printer for professional task, but, what if the user has to face the technical issues. These devices are manufactured with innovative technology and are high-quality printing devices, famous for delivering brilliant print quality with vibrant colors and perfect finish. The Lexmark Printer enables you to perform various tasks smoothly and efficiently. Here, in this article, we will discuss the steps to Print Index Cards using Lexmark Inkjet Printers. If you have any technical glitches in the process.

How to Print Index Cards using Lexmark Inkjet Printers?

With the Lexmark Prints, you can print images, documents, invitation card, wedding card, index card, etc. and if you have a Lexmark color Inkjet printer and you want to print index cards with it, and then follow the steps given below: -

·         First of all, launch your browser on your PC.

·         Then, open the official site of Lexmark.

·         Now, search for the latest printer drivers that are compatible with your device.

·         Next, download the drivers and install it.

·         After that, restart your system.

·         Next, open the two sliding paper guides located at the base of the paper feed panel.

·         Then, put the index card into the center of the panel vertically.

·         Now, launch the app with which you want to print.

·         Then, navigate to ‘Setup’ menu and select the option ‘Page Setup.’

·         Next, choose the Lexmark printer for printing.

·         After searching the printer, search for the ‘Page Attributes settings.’

·         Then, go to ‘Paper-Size Setup’ option and choose ‘index-card’ size.

·         Next, save the settings.

·         Finally, choose the appropriate design for your card and print it.

Using these steps, you can print index cards with Lexmark Inkjet Printer. If you finding hurdle at any step, then call Lexmark phone number.

Simple Procedure Fix Norton Antivirus Installation Error or Issues on Windows 10 PC

Are you facing issues related to Norton Security and don’t know how to get rid of them? If yes, then no need to worry just follow the given steps and you will get the solution of your issue. The main reasons - Norton Product Is Not Getting Installed on Windows 10 is related to the OS compatibility, which creates trouble during Norton Antivirus installation.

Some other cause can be the invalid product key, which stops the Norton security setting up the process. You can get Norton Service for a solution or easily install Norton using the product key.

Steps to Fix Norton Installation problem on Windows 10 System:-

First of all, remove Temporary Files and Prefetch from Windows Device

Step-1: Close all the programs or applications running on your device

Step-2: To open ‘Run’ dialog box press key Window+ R simultaneously

Step-3: In the same type ‘prefetch’ and press enter

Step-4: Doing this, in the new window several files get listed

Step-5: To select all the files listed therein again press the keys “CTRL+A” together

Step-6: Press keys Shift+delete together as well as press yes button to permanently delete files.

Step-7: In the ‘Run’ dialog box type the command “%temp% “

You can also install a Norton removal tool on your windows device.

Step1: Download Norton removal tool

Step2: While the files are downloaded go to the specific folder and Click Ctrl+J

Step3: Search NRnR file and then double-click on it

Step4: With terms and conditions mentioned over it, a new window will open

Step5: To ‘Agree’ option on license agreement page select the radio button next

Step6: Select remove the only option by clicking on “Advanced” option and then remove

Step7: Reboot your PC once the process is completed

Now, try Re-Installing Norton Antivirus Again or dial toll-free Norton if your problem remains unchanged.

How to fix the Brother Printer Error TS-07? Brother Help

Brother is leading printer brand that is well-known for manufacturing and delivering the innovative printers with the distinct features. However, sometimes users face issue while using it. Here, in this article, we will discuss the Brother Printer Error TS-07. In case of any query, you can contact Brother Printer Helpline.

What is Brother Printer Error TS-07?

There can be several errors which user encounters while using Brother Printer. Among those errors, one error is Brother Printer Error TS-07. When the printer is unable to detect a WLAN access point or a router which has enabled the WPS or AOSS, then this error arises.

How to fix the brother printer error TS-07?

In order to fix the error TS-07, just follow the given steps: -

·         First of all, check whether the router has the feature of WPS or AOSS. Just by looking at the symbol given below, you ensure whether the router or the WLAN access point support it or not.

·         Now, if you see the symbol there, then the router or access point supports the feature of WPS or AOSS otherwise not.

·         Next, configure your brother printer with the wireless network connectivity. You can do it by using the feature the automatic wireless connectivity so that you can solve the issue easily.

·         After configuring, set the printer within the range of the router, and then press “Menu”.

·         Now, scroll down in the menu, reach the network button and click “OK”.

·         Then, choose the WLAN and click “OK”.

·         Next, choose WPS or AOSS and click “OK”.

·         Now, enabled WLAN is displayed. Accept it, so that you can start a wireless wizard.

·         Then, hold down the access point or the router for few seconds until the machine displays by asking you to start AODD or WPS.

·         As you click “OK”, it helps you to connect with the network by automatically detecting what mode your access point is.

·         Finally, when you get the ACK on the screen, proceed further.

So, this is what you all need to follow in order to troubleshoot the Error TS-07. In case, if you got stuck somewhere, then instead of getting panic just a give a call at Brother Customer Service Number and avail the solution within seconds.