How To Set Up Wireless Connection in PIXMA MG3540?

There are two ways to set up Canon PIXMA MG3540 Wireless connection. The first on is WPS connection method and the other one is Standard connection method. Both steps are given below. If you need any assistance, then you can go to set Up PIXMA MG3540 Wireless help.

WPS Connection Method

It is the easiest method for connecting the PIXMA MG3540 Printer to a network without password. Before you go through steps of WPS Connection Method some conditions need to be fulfilled which are:

·         First of all, the access point must have a physical WPS push button available. If the WPS push button is not available, then you can use the instructions in the Standard Connection Method.

·         Second thing is that, your network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Almost every WPS enabled access points use this protocol.

Steps for Connecting PIXMA MG3540 through WPS

·         First of all, switch on the printer.

·         Then, press the Wi-Fi button and release only it after the alarm light blinks.

·         Now, when the Wi-Fi button light flashes blue, then press the WPS button on the access point within 2 minutes. You can refer the access point user guide for starting WPS on the access point.

·         The flashing of blue light next to the Wi-Fi button will keep indicates that the printer is searching for the network.

·         The power lights and Wi-Fi will flash once the printer starts connecting to the access point and will stop flashing and stay lit once the connection between the printer and the wireless network is established successfully.

Making Confirmation through Network Settings

 Follow the steps given below in order to make sure that the printer is connected successfully to wireless network:

·         Switch on the printer.

·         After that, load A4 or letter sized plain paper sheet.

·         Press and hold the resume or cancel button until alarm lamp 15time flashes and after that release it.

·         Network information page will be successfully printed.

·         Refer the printout and you can check the name of the connection under the “SSID” (Service Set Identifier) field while the “Connection” field should indicate “Active”.

Standard Connection Method

In case, if your router does not support WPS, then you can use Standard Connection Method.

·         First of all, insert the CD which came along with the Printer device. You can also download the manual and software of the Canon Printer model number PIXMA MG3540.

·         Now, initial screen appears click the Next.
·         A screen will displayed asking you to connect between USB or wireless connection.
·         Your printer and lamp power should be turned on and click on Next.
·         After that, click on connect to network tab.
·         Next, after connecting to network click on Cableless setup.
·         Now, hold the printer Wi-Fi button till the orange lamp flashes, and then release it after the second flash.
·         Also make sure that blue (Wi-Fi) lamp flashes quickly and green power lamp is lit and click on the Next.
·         Now, the screen appears for region selection and click on Next.
·         Select the place of residence and click on the Next button.
·         After that, select the software you wish to install and click Next.
·         Next, click on agree of end user license agreement.
·         Now, Installation Wizard Processes and click on Next button.
·         At last, the screen appears with model number and name of wireless network. And Windows Cabless Setup is completed.

Hopefully, the above stated methods are helpful in setting up your printer. If you are detecting any trouble in the process.

Things you need to Remember before Changing Gmail Password

Passwords are the most essential credential which you need to access any mail service. Nowadays, when there are lot of security issues, such hacking, spamming, data stealing, and much more it is very important for you to keep your password strong and don’t keep the same password for very long time. It is very easy to change the Gmail passwords however, there are few things which you need to keep in mind while changing it. Here, in this article, we will discuss the things which you need to remember before changing Gmail password. So, before starting Gmail password recovery service have an eye on these things.

·         Determine The strength Of The password : - Strength of the password is very important thing which you need to keep in mind. It will be determined on the basis of factors that includes length of the password, character length etc. The red indication in the password checker implies that the password which you entered is insecure and the green indication shown that the password you entered was secure. Create the password which is combination of special characters, alphabets, and number.

·         Update the System: - This is very essential in order to defend your mail from threats including spam and vulnerabilities. It is also suggested that allow your device for updating automatically. That’s the one way you can terminate the threats and malicious links.

·         Antivirus: - To keep your email and confidential data safe from being tracked and theft, you need good security software. Antivirus is very essential thing for securing the email and its data from the malicious links including spam mails, Hijackers, unsolicited web mails etc.

·         Never share password: - Sharing your Gmail password with someone is not a very good idea. To be safe keep your password secret and protected from anyone.

These are the some important things which you need to keep in mind while changing your Gmail password.