Nowadays a question is very popular -I forgot TP-Link Wireless Extender
password or lost access due to that he/she not able to login into TP-Link
webpage nor set up improvement security settings. Users also looking for
TP-Link to secure wireless connection extender
therefore that mysterious can’t breach their device settings.
Actually, a wireless extender can act as a link between the new or old
router. You can use an old device as an extender as well as a repeater to boost
the strong suit signals or spread out the range of signals if you have upgraded
to a new router.
Follow Below-Given Steps to secure your TP-link Wireless extender:-
Step-1: Connect an Ethernet with a computer using cable. Make sure LAN
port and the ethernet port should be connected via single Ethernet cable.
Note: Inside the wan part of a router the ADSL cable of modem goes
Step-2: Type the IP 192.168.1.1 (default) in the web browser.
Step-3: Now enter the login credentials such as username and password.
Step-4: The default username and password is “admin”.
Step-5: Note the SSID once you are logged in in wireless settings.
Step-6: Under wireless settings go to wireless security
Step-7: Now simply configure the old TP-link as an access point.
Step-8: Connect your computer to access point.
Step-9: Set the static IP address for your computer using steps
Open control panel -> Network and Internet -> Network and Sharing
Settings after that access TCP/IP local address.
Step-10: In local area connection properties and simply select use the
following IP address -> 192.168.1.100
Step-11: Go to the browser once these settings are complete after that
type of access point IP address
Step-12: Login with username and password as admin.
Step-13: By default, the operation mode is set to access point.
Step-14: To universal repeater change the operation mode
Step-15: Click on save to apply changes.
No comments:
Post a Comment